Architecture:Specification of BABEL Interfaces
Previous: Overview | Next: Modules |
Contents
Interfaces
Overview
In this page we present a number of standardized interfaces (IFs) for each layer of modules in our architecture. One given module may implement only one or several such interfaces simultaneously, a specially common case in the HAD layer.
Each interface is implemented in one and only one BABEL service groups, whose services are specified here. Data types are given in the standard BABEL description language (BDL), with some small additions declared under the namespace BABEL::COMMON, as shown in this Appendix.
The input parameter "devIndex" deserves more discussion, since it solves the problem of multiple copies of hardware devices with just one software module. This parameter is a zero-based index which specifies which device is being referenced for each access. The number of different devices is stored in the RPD (see section 4). Only modules in layers 2 and 3 are supposed to know about this parameter, so high-level modules never need to worry about how many hardware devices are present on the robot.
Developers of HAD modules are strongly encouraged to do implement real support for "devIndex". For example, at module start-up, the RPD may be checked to discover how many devices are present on the robot and what are they parameters (configuration ".ini"-like text block). An internal list of objects can be hold within the BABEL module, one for each physical device, so each request is directed to the appropriate device. If however, "devIndex" is ignored in either the calling or called part, please set it to "0" for compatibility with future versions that will really do use this index.
Hardware Abstraction Drivers (HAD) interfaces
The next section (Modules) contains a list of existing modules and the corresponding implemented IFs.
DRV_IOBOARD
BABEL service group | BABEL services to implement | |
|
<cpp>
in short devIndex, out unsigned short count ) </cpp> |
Returns the number of Analog-to-Digital converters (ADC) available as inputs on this device. |
<cpp>
in short devIndex, out COMMON::SeqOfFloats readings, out boolean error ) </cpp> |
Return the latest ADC readings from the device. They are given in volts and are supposed to be acquired in last few milliseconds (Max. 1 sec.). Error is true on any error. | |
<cpp>
in short devIndex, out unsigned short count ) </cpp> |
Returns the number of Digital-to-Analog converters (DAC) available as outputs on this device. |
|
<cpp>
in short devIndex, in unsigned short channel, in float value, out boolean error ) </cpp> |
Sets an analog output. Desired value is given in volts, first channel is 0; error is true on failure. |
|
<cpp>
in short devIndex, out unsigned short count ) </cpp> |
Returns the number of sonars-range-finders attached to this device. |
|
<cpp>
in short devIndex, out COMMON::SeqOfFloats readings, out boolean error ) </cpp> |
Return the latest sonars readings from the device. They are given in meters and are supposed to be acquired in last few milliseconds (Max. 1 sec.). Error is true on any error. |
|
<cpp>
in short devIndex, out unsigned short count ) </cpp> |
Returns the number of PWM generators available as outputs on this device. They can be used to control servos. |
|
<cpp>
in short devIndex, in unsigned short channel, in float value, out boolean error ) </cpp> |
Sets the PWM “on” period, given in seconds. Typical values are 0.0002-0.004 secs; first channel is 0; error is true on failure. |
DRV_WHEELS_MOBILE_BASE
BABEL service group | BABEL services to implement | |
|
<cpp>
in short devIndex, in boolean reset, out double x, out double y, out double phi, out double v, out double w, out boolean error ) </cpp> |
Reads the current odometric increment: x,y in meters and phi in radians, positive values are anticlockwise. phi=0 means heading towards positive x axis. If reset is true, odometry is set to (0,0,0) thus each request acquires the motion difference. Linear (v) and angular (w) velocities are also estimated, in m/s (positive/negative for forward/backward) and rad/s (positive is anticlockwise), respectively; error is true on failure. |
<cpp>
in short devIndex, in double x, in double y, in double phi, out boolean error ) </cpp> |
Changes the odometry estimation of the device. ; error is true on failure. |
|
<cpp>
in short devIndex, in double v, in double w, out boolean error ) </cpp> |
Changes the desired base linear (v) and angular (w) velocities, in m/s and rad/s, respectively. The conventions are the same than in service “getOdometry”; error is true on failure. |
|
<cpp>
in short devIndex, out double x, out double y, out double phi, out double v, out double w, out boolean error ) </cpp> |
Only for simulated robots: It returns the true pose, and velocities, of the robot in the simulated world coordinate reference. In non-simulated modules this method may return the current robot odometry. |
DRV_2D_RANGE_SCANNER
BABEL service group | BABEL services to implement | |
|
<cpp>
in short devIndex, out COMMON::SeqOfFloats scan, out COMMON::SeqOfBools valid, out COMMON::TTimeStamp time, out boolean error ) </cpp> |
Reads the last received scan, as distances in meters. Valid indicates non-reflected rays or any other error in individual measurements; error is true on failure. |
<cpp>
in short devIndex, out COMMON::SeqOfBytes obs, out boolean error ) </cpp> |
Return the last scan as a serialized MRPT object of the class mrpt::slam::CObservation2DRangeScan. |
DRV_INERTIAL_SENSOR
BABEL service group | BABEL services to implement | |
|
<cpp>
in short devIndex, out COMMON::SeqOfBytes obs, out boolean error ) </cpp> |
Return the last reading as a serialized MRPT object of the class mrpt::slam::CObservationIMU. |
DRV_BATTERY_LEVEL
BABEL service group | BABEL services to implement | |
|
<cpp>
in short devIndex, out boolean charging, out float level, out float estLife, out boolean error ) </cpp> |
Reads the level of the battery (0:empty, 1:full), and an estimation of the remaining running time to full discharge (estLife) in seconds; if charging is true, the robot is connected to a power supply and previous values should not be applicable. error is true on any error. |
DRV_SPEECH
BABEL service group | BABEL services to implement | |
|
<cpp>
in short devIndex, in boolean enable, out boolean error ) </cpp> |
Enables (true) or disables (false) sending events on speech detection. error is true on any error. Default is disabled. Event code is 5000. |
<cpp>
in short devIndex, out COMMMON::SeqOfStrings phrases out boolean error ) </cpp> |
Returns the queue of last recognised phrases in a strings list. If none the list will be empty. This can be polled or read after an event is received. error is true on any error. |
|
<cpp>
in short devIndex, in string text, out boolean error ) </cpp> |
Synthesizes the given text. error is true on any error. This should returns immediately, and do not wait until execution completion. |
DRV_PTU
BABEL service group | BABEL services to implement | |
|
<cpp>
in short devIndex, in float yaw, in float pitch out boolean error ) </cpp> |
Changes the orientation of the PTU. Angles are in radians, and error will be true on any error. |
DRV_MOBILE_JOINT
BABEL service group | BABEL services to implement | |
|
<cpp>
in short devIndex, out COMMMON::TMatrix44 pose, out boolean error ) </cpp> |
Returns the current pose of the termination point (to be defined in each specific device) relative to the base of the element. error will be true if the measure is unavailable. (See section 4) |
DRV_GPS
BABEL service group | BABEL services to implement | |
|
<cpp>
in short devIndex, out double lat, out double lon, out double height, out short fixQuality, out COMMON::TTimeStamp time, out boolean error ) </cpp> |
Returns the current estimation from the device (fixQuality: 1=GPS, 2=DGPS, 4=RTK fixed, 5=RTK Float). error will be true if the device is unavailable. |
<cpp>
in short devIndex, out COMMON::SeqOfBytes obs, out boolean error ) </cpp> |
Return the last reading as a serialized MRPT object of the class mrpt::slam::CObservationGPS. |
Common Sensory Interface
BABEL service group | BABEL services to implement | |
|
<cpp>
in short devIndex, out COMMON::SeqOfBytes SF, out boolean error ) </cpp> |
SF is a MRPT mrpt::slam::CSensoryFrame object. The lastest available observations from each sensor are returned. If no valid observation can be acquired, error is true. All observations in the SF can be of the same class, which must be specified in modules documentation. Max. execution time should be <100ms |
<cpp>
in boolean onNewObservation, in boolean onFailure ) </cpp> |
Enables (true) or disables (false) sending events on arrival of new measurements or a sensors failure. Default values are all events disabled. The events numeric codes must be unique for each module (see appendix II). |